This documentation is for a development version of IPython. There may be significant differences from the latest stable release.
Implementation of execution-related magic functions.
Object returned by the timeit magic with info about the run.
Contain the following attributes :
loops: (int) number of loop done per measurement repeat: (int) number of time the mesurement has been repeated best: (float) best execusion time / number all_runs: (list of float) execusion time of each run (in s) compile_time: (float) time of statement compilation (s)
Fill in the AST template for timing execution.
This is quite closely tied to the template definition, which is in ExecutionMagics.timeit().
Fill in the statement to be timed
Fill in the setup statement
Magics related to code execution, debugging, profiling, etc.
%capture [--no-stderr] [--no-stdout] [--no-display] [output]
run the cell, capturing stdout, stderr, and IPython’s rich display() calls.
|--no-stderr||Don’t capture stderr.|
|--no-stdout||Don’t capture stdout.|
|--no-display||Don’t capture IPython’s rich display.|
%debug [--breakpoint FILE:LINE] [statement [statement ...]]
Activate the interactive debugger.
This magic command support two ways of activating debugger. One is to activate debugger before executing code. This way, you can set a break point, to step through the code from the point. You can use this mode by giving statements to execute and optionally a breakpoint.
The other one is to activate debugger in post-mortem mode. You can activate this mode simply running %debug without any argument. If an exception has just occurred, this lets you inspect its stack frames interactively. Note that this will always work only on the last traceback that occurred, so you must call this quickly after an exception that you wish to inspect has fired, because if another one occurs, it clobbers the previous one.
If you want IPython to automatically do this on every exception, see the %pdb magic for more details.
|--breakpoint <FILE:LINE>, -b <FILE:LINE>|
|Set break point at LINE in FILE.|
Define a macro for future re-execution. It accepts ranges of history, filenames or string objects.
-r: use ‘raw’ input. By default, the ‘processed’ history is used, so that magics are loaded in their transformed version to valid Python. If this option is given, the raw input as typed at the command line is used instead.
-q: quiet macro definition. By default, a tag line is printed to indicate the macro has been created, and then the contents of the macro are printed. If this option is given, then no printout is produced once the macro is created.
This will define a global variable called name which is a string made of joining the slices and lines you specify (n1,n2,... numbers above) from your input history into a single string. This variable acts like an automatic function which re-executes those lines as if you had typed them. You just type ‘name’ at the prompt and the code executes.
The syntax for indicating input ranges is described in %history.
Note: as a ‘hidden’ feature, you can also use traditional python slice notation, where N:M means numbers N through M-1.
For example, if your history contains (print using %hist -n ):
44: x=1 45: y=3 46: z=x+y 47: print x 48: a=5 49: print 'x',x,'y',y
you can create a macro with lines 44 through 47 (included) and line 49 called my_macro with:
In : %macro my_macro 44-47 49
Now, typing my_macro (without quotes) will re-execute all this code in one pass.
You don’t need to give the line-numbers in order, and any given line number can appear multiple times. You can assemble macros with any lines from your input history in any order.
The macro is a simple object which holds its value in an attribute, but IPython’s display system checks for macros and executes them as code instead of printing them when you type their name.
You can view a macro’s contents by explicitly printing it with:
Control the automatic calling of the pdb interactive debugger.
Call as ‘%pdb on’, ‘%pdb 1’, ‘%pdb off’ or ‘%pdb 0’. If called without argument it works as a toggle.
When an exception is triggered, IPython can optionally call the interactive pdb debugger after the traceback printout. %pdb toggles this feature on and off.
The initial state of this feature is set in your configuration file (the option is InteractiveShell.pdb).
If you want to just activate the debugger AFTER an exception has fired, without having to type ‘%pdb on’ and rerunning your code, you can use the %debug magic.
Run a statement through the python code profiler.
In cell mode, the additional code lines are appended to the (possibly empty) statement in the first line. Cell mode allows you to easily profile multiline blocks without having to put them in a separate function.
The given statement (which doesn’t require quote marks) is run via the python profiler in a manner similar to the profile.run() function. Namespaces are internally managed to work correctly; profile.run cannot be used in IPython because it makes certain assumptions about namespaces which do not hold under IPython.
you can place restrictions on what or how much of the profile gets printed. The limit value can be:
You can combine several limits with repeated use of the option. For example, -l __init__ -l 5 will print only the topmost 5 lines of information about class constructors.
|-r||return the pstats.Stats object generated by the profiling. This object has all the information about the profile in it, and you can later use it for further analysis or in other functions.|
sort profile by given key. You can provide more than one key by using the option several times: ‘-s key1 -s key2 -s key3...’. The default sorting key is ‘time’.
The following is copied verbatim from the profile documentation referenced below:
When more than one key is provided, additional keys are used as secondary criteria when the there is equality in all keys selected before them.
Abbreviations can be used for any key names, as long as the abbreviation is unambiguous. The following are the keys currently defined:
Note that all sorts on statistics are in descending order (placing most time consuming items first), where as name, file, and line number searches are in ascending order (i.e., alphabetical). The subtle distinction between “nfl” and “stdname” is that the standard name is a sort of the name as printed, which means that the embedded line numbers get compared in an odd way. For example, lines 3, 20, and 40 would (if the file names were the same) appear in the string order “20” “3” and “40”. In contrast, “nfl” does a numeric compare of the line numbers. In fact, sort_stats(“nfl”) is the same as sort_stats(“name”, “file”, “line”).
|-T <filename>||save profile results as shown on screen to a text file. The profile is still shown on screen.|
|-D <filename>||save (via dump_stats) profile statistics to given filename. This data is in a format understood by the pstats module, and is generated by a call to the dump_stats() method of profile objects. The profile is still shown on screen.|
|-q||suppress output to the pager. Best used with -T and/or -D above.|
If you want to run complete programs under the profiler’s control, use %run -p [prof_opts] filename.py [args to program] where prof_opts contains profiler specific options as described here.
You can read the complete documentation for the profile module with:
In : import profile; profile.help()
Run the named file inside IPython as a program.
%run [-n -i -e -G] [( -t [-N<N>] | -d [-b<N>] | -p [profile options] )] ( -m mod | file ) [args]
Parameters after the filename are passed as command-line arguments to the program (put in sys.argv). Then, control returns to IPython’s prompt.
This is similar to running at a system prompt python file args, but with the advantage of giving you IPython’s tracebacks, and of loading all variables into your interactive namespace for further use (unless -p is used, see below).
The file is executed in a namespace initially consisting only of __name__=='__main__' and sys.argv constructed as indicated. It thus sees its environment as if it were being run as a stand-alone program (except for sharing global objects such as previously imported modules). But after execution, the IPython interactive namespace gets updated with all variables defined in the program (except for __name__ and sys.argv). This allows for very convenient loading of code for interactive work, while giving each program a ‘clean sheet’ to run in.
Arguments are expanded using shell-like glob match. Patterns ‘*’, ‘?’, ‘[seq]’ and ‘[!seq]’ can be used. Additionally, tilde ‘~’ will be expanded into user’s home directory. Unlike real shells, quotation does not suppress expansions. Use two back slashes (e.g. \\*) to suppress expansions. To completely disable these expansions, you can use -G flag.
|-n||__name__ is NOT set to ‘__main__’, but to the running file’s name without extension (as python does under import). This allows running scripts and reloading the definitions in them without calling code protected by an if __name__ == "__main__" clause.|
|-i||run the file in IPython’s namespace instead of an empty one. This is useful if you are experimenting with code written in a text editor which depends on variables defined interactively.|
|-e||ignore sys.exit() calls or SystemExit exceptions in the script being run. This is particularly useful if IPython is being used to run unittests, which always exit with a sys.exit() call. In such cases you are interested in the output of the test results, not in seeing a traceback of the unittest module.|
|-t||print timing information at the end of the run. IPython will give you an estimated CPU time consumption for your script, which under Unix uses the resource module to avoid the wraparound problems of time.clock(). Under Unix, an estimate of time spent on system tasks is also given (for Windows platforms this is reported as 0.0).|
If -t is given, an additional -N<N> option can be given, where <N> must be an integer indicating how many times you want the script to run. The final timing report will include total and per run results.
For example (testing the script uniq_stable.py):
In : run -t uniq_stable IPython CPU timings (estimated): User : 0.19597 s. System: 0.0 s. In : run -t -N5 uniq_stable IPython CPU timings (estimated): Total runs performed: 5 Times : Total Per run User : 0.910862 s, 0.1821724 s. System: 0.0 s, 0.0 s.
run your program under the control of pdb, the Python debugger. This allows you to execute your program step by step, watch variables, etc. Internally, what IPython does is similar to calling:
with a breakpoint set on line 1 of your file. You can change the line number for this automatic breakpoint to be <N> by using the -bN option (where N must be an integer). For example:
%run -d -b40 myscript
will set the first breakpoint at line 40 in myscript.py. Note that the first breakpoint must be set on a line which actually does something (not a comment or docstring) for it to stop execution.
Or you can specify a breakpoint in a different file:
%run -d -b myotherfile.py:20 myscript
When the pdb debugger starts, you will see a (Pdb) prompt. You must first enter ‘c’ (without quotes) to start execution up to the first breakpoint.
Entering ‘help’ gives information about the use of the debugger. You can easily see pdb’s full documentation with “import pdb;pdb.help()” at a prompt.
run program under the control of the Python profiler module (which prints a detailed report of execution times, function calls, etc).
You can pass other options after -p which affect the behavior of the profiler itself. See the docs for %prun for details.
In this mode, the program’s variables do NOT propagate back to the IPython interactive namespace (because they remain in the namespace where the profiler executes them).
Internally this triggers a call to %prun, see its documentation for details on the options available specifically for profiling.
There is one special usage for which the text above doesn’t apply: if the filename ends with .ipy[nb], the file is run as ipython script, just as if the commands were written on IPython prompt.
specify module name to load instead of script path. Similar to the -m option for the python interpreter. Use this option last if you want to combine with other %run options. Unlike the python interpreter only source modules are allowed no .pyc or .pyo files. For example:
%run -m example
will run the example module.
|-G||disable shell-like glob expansion of arguments.|
Print the last traceback with the currently active exception mode.
See %xmode for changing exception reporting modes.
Time execution of a Python statement or expression.
The CPU and wall clock times are printed, and the value of the expression (if any) is returned. Note that under Win32, system time is always reported as 0, since it can not be measured.
This function can be used both as a line and cell magic:
This function provides very basic timing functionality. Use the timeit magic for more controll over the measurement.
In : %time 2**128 CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s Wall time: 0.00 Out: 340282366920938463463374607431768211456L In : n = 1000000 In : %time sum(range(n)) CPU times: user 1.20 s, sys: 0.05 s, total: 1.25 s Wall time: 1.37 Out: 499999500000L In : %time print 'hello world' hello world CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s Wall time: 0.00 Note that the time needed by Python to compile the given expression will be reported if it is more than 0.1s. In this example, the actual exponentiation is done by Python at compilation time, so while the expression can take a noticeable amount of time to compute, that time is purely due to the compilation: In : %time 3**9999; CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s Wall time: 0.00 s In : %time 3**999999; CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s Wall time: 0.00 s Compiler : 0.78 s
Time execution of a Python statement or expression
Time execution of a Python statement or expression using the timeit module. This function can be used both as a line and cell magic:
Options: -n<N>: execute the given statement <N> times in a loop. If this value is not given, a fitting value is chosen.
-r<R>: repeat the loop iteration <R> times and take the best result. Default: 3
-t: use time.time to measure the time, which is the default on Unix. This function measures wall time.
-c: use time.clock to measure the time, which is the default on Windows and measures wall time. On Unix, resource.getrusage is used instead and returns the CPU user time.
-p<P>: use a precision of <P> digits to display the timing result. Default: 3
-q: Quiet, do not print result.
In : %timeit pass 10000000 loops, best of 3: 53.3 ns per loop In : u = None In : %timeit u is None 10000000 loops, best of 3: 184 ns per loop In : %timeit -r 4 u == None 1000000 loops, best of 4: 242 ns per loop In : import time In : %timeit -n1 time.sleep(2) 1 loops, best of 3: 2 s per loop
The times reported by %timeit will be slightly higher than those reported by the timeit.py script when variables are accessed. This is due to the fact that %timeit executes the statement in the namespace of the shell, compared with timeit.py, which uses a single setup statement to import function or create variables. Generally, the bias does not matter as long as results from timeit.py are not mixed with those from %timeit.